TC Series DIN 96*96 Type                                                      
　

 
TC-96 Series
TC96-AA-- Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AA--
Alarm:Non
Display Method:Analog Deviation Meter
Display Tolerance:1.0% of F.S.
Display Range:±40°C
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of F.S.
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-AA---A Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AA---A
Alarm:AL Alarm
Display Method:Analog Deviation Meter
Display Tolerance:1.0% of F.S.
Display Range:±40°C
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of F.S.
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-AA---AH Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AA---AH
Alarm:AL+HB Alarm
Display Method:Analog Deviation Meter
Display Tolerance:1.0% of F.S.
Display Range:±40°C
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of F.S.
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-AD-- Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AD--
Alarm:Non
Display Method:14mm 7 Segment Red LED
Display Tolerance:0.5% of F.S.
Display Range:-99 ~ +99 , 0 ~ 999 , 0 ~ 1200
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of F.S.
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-AD---A Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AD---A
Alarm:AL Alarm
Display Method:14mm 7 Segment Red LED
Display Tolerance:0.5% of F.S.
Display Range:-99 ~ +99 , 0 ~ 999 , 0 ~ 1200
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of F.S.
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-AD---AH Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AD---AH
Alarm:AL+HB Alarm
Display Method:14mm 7 Segment Red LED
Display Tolerance:0.5% of F.S.
Display Range:-99 ~ +99 , 0 ~ 999 , 0 ~ 1200
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of F.S.
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-AN-- Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Trimmer< Variable Resister >
Model:TC96-AN--
Alarm:Non
Display Method:Non
Display Tolerance:Non
Display Range:Non
Setting Method:Trimmer(Variable Resister)
Setting Tolerance:1.0% of Setting Range
Setting Range:-50 ~ +50 , 0 ~ 100 , 0 ~ 200 , 0 ~ 400 , 0 ~ 600 or 0 ~ 1200
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-DA-- Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DA--
Alarm:Non
Display Method:Analog Deviation Meter
Display Tolerance:1.0% of F.S.
Display Range:±40°C
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-DA---A Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DA---A
Alarm:AL Alarm
Display Method:Analog Deviation Meter
Display Tolerance:1.0% of F.S.
Display Range:±40°C
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-DA---AH Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DA---AH
Alarm:AL+HB Alarm
Display Method:Analog Deviation Meter
Display Tolerance:1.0% of F.S.
Display Range:±40°C
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC- 96 Series
TC96-DD-- Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DD--
Alarm:Non
Display Method:14mm 7 Segment Red LED
Display Tolerance:0.5% of F.S.
Display Range:-99 ~ +99 , 0 ~ 999 , 0 ~ 1200
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-DD---A Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DD---A
Alarm:AL Alarm
Display Method:14mm 7 Segment Red LED
Display Tolerance:0.5% of F.S.
Display Range:-99 ~ +99 , 0 ~ 999 , 0 ~ 1200
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-DD---AH Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DD---AH
Alarm:AL+HB Alarm
Display Method:14mm 7 Segment Red LED
Display Tolerance:0.5% of F.S.
Display Range:-99 ~ +99 , 0 ~ 999 , 0 ~ 1200
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm
TC-96 Series
TC96-DN-- Temperature Controller
HELP_FILE： NO FILE
Discription：Setting Method-Digital Switch
Model:TC96-DN--
Alarm:Non
Display Method:Non
Display Tolerance:Non
Display Range:Non
Setting Method:Digital Switch
Setting Tolerance:0.5% of F.S.
Setting Range:-99 ~ +99 , 0 ~ 199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999 , 0 ~ 1199
General Data
Sensor Type:K(CA) , J(IC) or PT-100Ω
Output Method:Relay(5A/250VAC) , Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF , ON/OFF or Proportion
Proportion Band:Appro 2.5% of F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer: Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~ -50° or -50° ~ +50° of Setting Value
Output Method:Relay , 0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ; 1.0A~50A
Output Method:Relay , 0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC ±20% 50/60Hz
Current Consumption:2.5VA max.
Insulation Resistance:Over 50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over 2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~ +60°C ; 35%~85% RH
Vibration Resistance:10 ~ 55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm