|
|
TC-4896 Series |
|
TC4896-DA-- Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-DA--
Alarm:Non
Display Method:Analog
Deviation Meter
Display Tolerance:1.0% of F.S
Display Range:±40°C
Setting Method:Digital Switch
(3 Digits)
Setting Tolerance:0.5% of
Setting Range
Setting Range:-99 ~ +99 , 0 ~
199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-DA---A Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-DA---A
Alarm:AL Alarm
Display Method:Analog
Deviation Meter
Display Tolerance:1.0% of F.S
Display Range:±40°C
Setting Method:Digital Switch
(3 Digits)
Setting Tolerance:0.5% of
Setting Range
Setting Range:-99 ~ +99 , 0 ~
199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-DA---AH Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-DA---AH
Alarm:AL+HB
Display Method:Analog
Deviation Meter
Display Tolerance:1.0% of F.S
Display Range:±40°C
Setting Method:Digital Switch
(3 Digits)
Setting Tolerance:0.5% of
Setting Range
Setting Range:-99 ~ +99 , 0 ~
199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-DD-- Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-DD--
Alarm:Non
Display Method:14 mm 7
Segment Red LED
Display Tolerance:0.5% of F.S
+ 1 Digit
Display Range:-99 ~ +99 ,
0~999
Setting Method:Digital Switch
(3 Digits)
Setting Tolerance:0.5% of
Setting Range
Setting Range:-99 ~ +99 , 0 ~
199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-DD---A Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-DD---A
Alarm:AL Alarm
Display Method:14 mm 7
Segment Red LED
Display Tolerance:0.5% of F.S
+ 1 Digit
Display Range:-99 ~ +99 ,
0~999
Setting Method:Digital Switch
(3 Digits)
Setting Tolerance:0.5% of
Setting Range
Setting Range:-99 ~ +99 , 0 ~
199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-DD---AH Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-DD---AH
Alarm:AL+HB
Display Method:14 mm 7
Segment Red LED
Display Tolerance:0.5% of F.S
+ 1 Digit
Display Range:-99 ~ +99 ,
0~999
Setting Method:Digital Switch
(3 Digits)
Setting Tolerance:0.5% of
Setting Range
Setting Range:-99 ~ +99 , 0 ~
199 , 0 ~ 399 , 0 ~ 599 , 0 ~ 999
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-ND-K Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-ND-K
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.S
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
TC-4896 Series |
|
TC4896-ND-PT Temperature Controller
HELP_FILE: NO FILE
Discription:Setting Method-Digital Switch< 3 Digits >
Model:TC4896-ND-PT
General Data
Sensor Type:K(CA) , J(IC) or
PT-100Ω
Output Method:Relay(5A/250VAC)
, Voltage(20mA/12V) , Linear(4~20mA)
Control Method:P+D ON/OFF ,
ON/OFF or Proportion
Proportion Band:Appro 2.5% of
F.
Cycle Time:2 Sec or 20Sec (ON+OFF)
Manual Reset:Trimmer:
Range±10°C
Unit of Degree:°C or °F
AL Alarm
Setting Method:Trimmer(AL)
Setting Range:0 ~ +50° , 0 ~
-50° or -50° ~ +50° of Setting Value
Output Method:Relay ,
0.5A/250VAC
HB Alarm
Setting Method:Trimmer(HB)
Setting Range:0.5A~25A ;
1.0A~50A
Output Method:Relay ,
0.5A/250VAC
Electrical Data
Power Supply:110 / 220VAC
±20% 50/60Hz
Current Consumption:2.5VA
max.
Insulation Resistance:Over
50MΩ/500VDC Between Power And Another Terminal
Dielectrical Strength:Over
2.5KV /1min Between Power And Another Terminal
Mechanical Data
Operation Temp./Hum:-20°C ~
+60°C ; 35%~85% RH
Vibration Resistance:10 ~
55Hz / 1.5mm , 2Hrs in X.Y.Z Direction
Panel Thickness:1.0 ~ 8.0mm |
|
|
|