|
*Accuracy is less
than ± 1.0%of F.S
*Pulse rate (K-factor) is settable
*Unit of Flow total meter is selectable
(Liter/Gallon/Kilo-liter)
*Unit of pulse is selectable ( LPP / GPP / KLPP)
*Status of Flow rate meter limit output (NO/NC) is changeable
*Power on delay time is settable for Flow rate meter limit
output
General data
|
Specification |
Description |
|
Fluid |
Water or Chemical fluid |
|
Accuracy |
± 1.0% of F.S.@25°C |
|
Flow velocity |
10m/s max. |
|
Low cut |
0.3m / s min. |
|
Operating press |
5kg/cm² |
|
Range ability |
10:1 |
|
Response time |
Real time |
|
Material |
Paddle: Tefzel ; Body : PP |
|
Operating temperature |
「PVC」<50°C/「PP」<80°C/「PF」<100°C/「ST」<120°C |
|
Operating circumstance |
-25°C~+80°C ; 35%~85% RH |
|
Protection class |
IP-65 |
|
Approval |
CE |
|
KTP |
- |
15 |
- |
RS |
- |
PF |
- |
DIN |
- |
M12 |
|
1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
6 |
1) Series
「KTM」= Paddle Wheel Flow rate Meter with
transmitter
「KTP」= Paddle Wheel Flow rate Meter&Flow
total meter
「KTS」= Paddle Wheel Flow rate Meter
「KTW」= Paddle Wheel
Flow Sensor
2) Pipe size
「08」= 「DN08(1/4")」/「10」=「DN10(3/8")」
「15」= 「DN15(1/2")」/「20」= 「DN20(3/4")」
「25」= 「DN25(1")」 / 「40」= 「DN40(1 1/2")」
「50」= 「DN50(2")」 / 「65」=「DN65(2 1/2")」
3) Communication or Transmitter
「Non」= Without communication
「RS」= KTP series with RS-485 or MODBUS
selectable
「A」= KTM & KTW series with Transmitter
(4~20mA)
「V」= KTM & KTW series with Transmitter
(0~5v)
「P」=KTW series pulse output only
4) Material of Union
「PP」= PP
「PF」= PVDF
「PVC」= PVC
「ST」= SUS316
5) Pipe standard
「DIN」= DIN standard
「JIS」= JIS standard
「ANS」= ANS standard
6) Connection method
「Non」= Lead wire (3m)
「5m」= Lead wire (5m)
「M12」= Connector M12 |
